Please choose from the options above to see price and availability.
Product prices and availability are accurate as of 2017-09-22 19:29:30 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Description of Hammerite Direct to Rust Metal Paint - Hammered Copper...
We are happy to offer the excellent Hammerite Direct to Rust Metal Paint - Hammered Copper Finish.
With so many on offer today, it is great to have a name you can recognise. The Hammerite Direct to Rust Metal Paint - Hammered Copper Finish is certainly that and will be a great purchase.
For this reduced price, the Hammerite Direct to Rust Metal Paint - Hammered Copper Finish comes highly respected and is always a popular choice amongst many people. Hammerite have provided some great touches and this means good value for money.
Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. Decorative hammered appearance is smooth to the touch and sheds water well. * Can be applied directly onto rusty metal. * No need for primer or undercoat. * Corrosion resistant. * Hammerite forms a superior barrier that not only seals out moisture but gives long lasting protection both inside and outside. Preparation: * Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush. * Remove dirt, dust and grease with diluted detergent. Rinse with clean water and allow time to dry. * Paint a test patch of Hammerite Direct to Rust Metal Paint Hammered onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint Hammered directly to surface. * If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint Hammered. * On bare zinc, aluminium and galvanised surfaces apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint Hammered. Appliance: * Ideal application temperature 8-25degC. * Lightly stir before use. Do not mix vigorously. * Do not mix paint from 2 tins or mix colours. * Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur. * Coventional spray application: Thin with Hammerite Brush Cleaner & Thinners at a ratio of 15% Thinners to Paint. Set spray gun at 25/35psi and use full fan spray at maximum volume. Apply 4 thin coats. Allow 1 hour between coats. Refer to spray equipment manufacturer's guidelines for the correct and safe use of sprayers. Touch dry 1-2 hours, recoatable after 4 hours. Coverage 5m/per sq litre